Before operation, first check whether the inner and outer surface wrapping is firm, whether the connection of accessory parts is firm, and whether the lead equivalent on the label meets the required equivalent. After inspection, wear the X-ray protection series products on the body, head, neck, and feet, and then proceed with the operation.
Maintenance and precautions for X-ray protection products
1. After the operation is completed, the X-ray protection series products should be placed flat or hung up with a hanger, and cannot be folded to avoid long-term folding causing breakage and wire leakage.
2. When the surface is dirty, it should be cleaned with a low concentration cleaning solution or a small amount of laundry detergent using a soft bristled brush, then washed with clean water, and directly placed in a ventilated place to cool dry.
3. When stored, it should be kept away from direct sunlight, heat sources, and well ventilated indoors. It is strictly prohibited to come into contact with chemicals such as acids and alkalis in order to extend its service life.
4. According to the GB16757-1997 standard, protective equipment has a service life of 4-5 years and should be inspected regularly. The inspection method is to touch or remove the fabric surface by hand and observe visually. If there are one-third cracks, the product cannot be used and must be scrapped and replaced.
